Cash Price £16,236.00
GSXR-1000R with New Engine with MotoGP Design
The GSXR-1000R sports a new engine that revs higher and makes more peak horsepower, while maintaining excellent low-to-mid-range power and drive. It is a compact and lightweight inline four, DOHC with chain cam drive and four titanium valves per cylinder set at narrow angles, with a more over-square bore/stroke ratio, a higher redline and a higher compression ratio. The new engine has a bore and stroke of 76 mm x 55.1 mm with 999.8cc displacement. It uses a new valve train developed in MotoGP competition on the GSX-RR, using thinner-wall, hollow camshafts operating lighter, F1-style pivoting finger followers. The Suzuki Racing VVT (SR-VVT), Suzuki Exhaust Tuning-Alpha (SET-A), and Suzuki Top Feed Injector (S-TFI) systems combine to make the Broad Power System, increasing high-rpm performance without reducing low and mid-range performance. The result is strong, linear power and enhanced acceleration throughout the rpm range.
Suzuki Racing Variable Valve Timing (SR-VVT)gsx-r1000-r-brochure
The Suzuki Racing VVT (SR-VVT), developed in MotoGP competition on the GSX-RR is unlike complicated systems used by other manufacturers, the SR-VVT system is simpler, more compact, and lighter. The system is built into the intake cam sprocket and an adjacent guide plate, using 12 steel balls positioned between slanted radial grooves in the intake cam sprocket and straight radial grooves in the guide plate attached directly to the camshaft. As centrifugal force moves the balls outward at high rpm, the offset grooves align, rotating the position of the cam sprocket on the camshaft and retarding intake cam timing, adding significantly to high-rpm power. The beauty of the SR-VVT system is in its compact simplicity, light weight, reliability and seamless operation. Centrifugal force is constantly produced when the engine is running, and is free in that it does not use power that could otherwise turn the rear wheel. For more than a decade, racers have not been able to feel when the system moved to change the valve timing. What they have been able to feel is a seamless, significant increase in high-rpm power, without sacrificing any low or mid-range. And the system is built into existing parts, takes up no extra room in the engine, with a minimal weight increase.
Suzuki Racing Finger Follower Valve Train
A new valve train developed in MotoGP competition. Each finger follower is 6 grams lighter than a conventional bucket tappet (10 grams vs. 16 grams), and because each follower pivots on a fixed shaft, its moving mass is just 3 grams. The lighter moving mass allows maximum engine rpm and valve lift to be increased while improving valve response and maintaining accurate valve control. Each finger follower in the GSX-R1000R is designed based on the actual followers used in the GSX-RR MotoGP race bike, including a DLC (Diamond-like Carbon) coating to increase durability.
Suzuki Exhaust Tuning-Alpha (SET-A)
The GSX-R1000R’s 4-into-2-into-1 thin-wall stainless-steel Suzuki Advanced Exhaust System (S-AES) is also designed to increase high-rpm horsepower without reducing mid-range and lower-rpm power. GSX-R1000 models have long used a servo-operated Suzuki Exhaust Tuning (SET) butterfly valve built into the mid-pipe to help maximise torque throughout the rpm range by optimising back pressure based on engine rpm, throttle position and gear position. But the GSX-R1000R’s exhaust system improves on that idea with the addition of new Suzuki Exhaust Tuning-Alpha (SET-A) butterfly valves . A header balance tube connects the head pipes for cylinders #1 and #4, and another header balance tube connects the head pipes for cylinders #2 and #3, a design feature that normally increases high-rpm power at the expense of mid-range and lower-rpm power. Suzuki engineers added a servo-operated SET-A butterfly valve in each header balance tube, which remains closed to enhance mid-range and low-rpm power, then opens at high rpm to add significant top-end power.
Suzuki Top Feed Injector (S-TFI)
The new throttle bodies are 19 mm shorter, simpler, lighter and more compact than the previous model’ s throttle bodies, with a larger bore (46 mm versus 44 mm). Each one has a single butterfly valve controlled by an advanced electronic engine management system, and each cylinder is fed by two ultra-fine-atomisation 10-hole injectors. One injector is mounted at a steep angle in the throttle body itself and operates any time the engine is running. A second showerhead injector—also known as a Top Feed Injector (TFI), is mounted in the top of the air cleaner box, directly over each throttle body’ s intake funnel (or velocity stack), and operates at higher rpm. The TFI showerhead injector delivers additional fuel in an improved spray pattern designed to enhance combustion efficiency, throttle response and top-end power.
New Brembo Discs and Calipers
New Brembo stainless steel brake discs are 10 mm larger in diameter, measuring 320 mm. Each disc features a new hybrid mounting system using a 50/50 combination of 5 conventional spring loaded floating pin mounts and 5 Brembo T-drive floating mounts. The Brembo T-drive floating mounts are lighter yet have more contact area between the disc and inner carrier, requiring fewer mounts (10) than conventional mounts alone (12), minimising the weight gain from the larger discs. But T-drive mounts can also produce an audible rattle in certain conditions. Conventional spring-loaded pin mounts are slightly heavier and produce a smaller contact area, but are quieter. Using a combination of T-drive and pin mounts reduces rattle as well as requiring fewer mounting points. The GSX-R1000’s Brembo radial-mount, monobloc front brake calipers each have four 32 mm pistons and work with a radial-pump, 19 mm master cylinder. The rear brake system uses a single-piston caliper and a 220 mm disc. The end of the front brake lever is slotted to reduce the chance that wind pressure will induce brake drag at high speed.
New Wheels and Tyres
New light weight, 6 spoke cast aluminium wheels contribute to nimble handling and sporty appearance. Bridgestone BATTLAX RACING STREET RS10 radial tyres have earned a good reputation worldwide for producing consistent performance and durability across a wide range of ambient conditions. The new GSX-R1000R comes with a 120/70ZR17M/C (58W) front tyre. A larger, 190/55ZR17M/C (75W) rear tyre replaces the existing model’s 190/50ZR17M/C (73W) rear tyre and is designed to work with the increase in horsepower and torque.
IMU Based Electronics
The new GSX-R1000R’s advanced electronic management system incorporates feedback from a Continental Inertial Measurement Unit (IMU) which tracks the motion and position of the motorcycle in 6-directions, along 3-axis, Pitch, Roll and Yaw. Monitoring these motorcycle motions in real time allows traction, braking and cornering control to be more precise and effective. The GSX-R1000R’s IMU-based systems are a product of advanced engineering, developed in MotoGP competition.
Motion Track TCS (Traction Control System)
Suzuki’s advanced Motion Track TCS allows the rider to select 10 different levels of traction control intervention, depending upon road or racetrack conditions as well as personal preference and experience. The TCS intervention can be changed while riding, as long as the throttle is closed. The Motion Track TCS continuously monitors front and rear wheel speed, throttle position, crankshaft position, gear position, and motorcycle motion, and quickly reduces engine power output when a loss of traction is detected or predicted. Power output is controlled by managing ignition timing and throttle valve position. Motion Track TCS reads sensor input every 4-milliseconds, for precise response. And by using input from the IMU (Inertial Measurement Unit), the ECM can calculate the motorcycle’s motion in 6-directions (along 3-axis, Pitch, Roll and Yaw), for more precise traction control.
Motion Track Brake System
The GSX-R1000R is equipped with a new Motion Track Brake System, which works with the IMU (Inertial Measurement Unit). The IMU constantly monitors vehicle movement in 6-directions along 3-axes, Pitch, Roll and Yaw. Using IMU input, the Motion Track Brake System reduces rear wheel lift during very hard braking* on the racetrack, and is especially effective on downhill sections of track. On the GSX-R1000R the system also optimises brake pressure when the motorcycle is leaning too.
Suzuki Drive Mode Selector (S-DMS)
Using the S-DMS switch on the left handlebar, the rider can select three different mapping and engine power delivery settings designed to match power delivery to various weather conditions or riding on different racetracks. The rider can change the power mode while riding, as long as the throttle is closed. Note, full power is available in all three modes. The S-DMS system works with the 10-level Motion Track TCS system, offering the rider a wide variety of power delivery and control choices.
The launch control system makes it easier for a racer to get a good start in competition by automatically limiting engine rpm and optimising torque delivery while the rider holds the throttle twist grip wide open and concentrates on feeding in the clutch lever. Once launch control is selected using a switch on the right handlebar, the system engages special maps controlling throttle valve opening and ignition timing. The system monitors throttle twist grip position, throttle valve position, engine rpm, gear position, front wheel speed, and rear wheel speed. At the moment of launch, the system is set to hold the engine at ideal rpm for an effective launch. Once the clutch lever is released and the clutch engaged, rpm is no longer limited but throttle opening is controlled to keep the engine at the ideal torque for strong acceleration. The launch control system not only helps the rider get a good initial launch, but also helps reduce the need to close the throttle twist grip prematurely. It does so by working with Motion Track TCS and controlling throttle valve opening and ignition timing while monitoring front and rear wheel speeds. The launch control system automatically disengages when the rider upshifts into third gear or closes the throttle twist grip.
Bi-Directional Quick Shift System
This system allows the rider to upshift and downshift without using the clutch or the throttle. The quick shift system allows the rider to upshift smoothly and quickly at full throttle, without closing the throttle. The system automatically interrupts power delivery just long enough (between 50 and 75 milliseconds, depending upon the sensitivity adjustment) to unload the transmission gear dogs and allow a clean upshift, producing smoother, almost uninterrupted acceleration. For quicker and smoother downshifts without manually blipping the throttle twist grip or using the clutch, the system automatically opens the throttle valves just enough to increase rpm and match engine speed to the next-lower gear ratio.
The GSX-R1000R has sleeker and more aerodynamic bodywork designed to improve handling and top speed on the racetrack. The front fairing is 13 mm narrower, and reshaped fairing ears are closer to the handlebars and produce better air flow around the rider’s hands and arms. The lower leading edge of the fairing nose directs air into new Suzuki Ram-Air Direct (SRAD) intake ducts, which have a smoother internal shape that increases the flow of pressurised air into the air cleaner box. The fairing radiator cowl projects forward on each side, directing more cooling air into the radiator itself. The shape of the front fender increases down force, smooths the flow of cooling air into the radiator and increases the air reaching the front brake calipers. The bodywork has a more connected flow line from the fairing nose the tail section. It has a smaller frontal projected area and smooth wind-tunnel-developed lines, reducing the coefficient of drag and all reducing lift at racetrack speeds. It’s lighter, producing less moment inertia and less leverage on the centre of gravity. And it directs the a flow to improve engine and brake cooling while also increasing down force, rider wind protection, and engine efficiency.
LED Lighting Technology
The Suzuki GSX-R1000R features a LED headlight that is more compact than a halogen headlight, yet produces excellent lighting. Installed in the nose of the fairing, the LED headlight is narrower and shorter, contributing to the new GSX-R’s aerodynamics. The low-beam and high-beam elements are stacked, with the low beam positioned above the high beam with LED position lights located above the SRAD intakes. At the rear, LED elements are used for the vertical taillight and brake light assembly, as well as for the license plate light. The LED license plate light is about half the size and significantly lighter than a conventional bulb, yet produces more light and is better at resisting vibration, allowing the rear fender assembly to be lighter. Also equipped as standard are LED indicators, making them lighter and brighter.
Featuring full LCD instrumentation. The dash is brighter and easier to read, and incorporates S-DMS mode and Motion Track TCS level indicators as well as a fuel gauge and readouts showing instantaneous or average fuel consumption, ambient temperature, freeze indicator and service reminders. Other features include a relocated, more visible shift light as well as speedometer, tachometer, odometer, trip meter, clock, lap time, and water temperature displays. Other indicators include neutral, high beam, turn signal, and ABS operation. The gear position indicator is linked to a new, more accurate magnetic sensor.
Have you read our Handy Guide to Getting on the Road?
|Max Power Output|
Glass Sparkle Black
Metallic Triton Blue
|Price On The Road||£16,236.00|
|0 Monthly Payments||£0.00|
|Price On The Road||£16,236.00|
|0 Monthly Payments||£0.00|
All pictures are for illustration purposes only. Prices are correct at time of updating website but are subject to change without notification, whilst stocks last. Finance is available to people aged 18 years or over, subject to status. Indemnities may be required. Written details available on request. Terms and Conditions apply.
All prices advertised include on the road charges which include delivery to dealer, 6 months Road Tax where applicable, including vehicle registration, number plates, pre-delivery inspections and build, petrol and VAT.
P&H Motorcycles Ltd is a Credit Broker and not a Lender.